Wednesday, December 28, 2011
Monday, November 14, 2011
Wednesday, November 9, 2011
SONY TV LED - Blinking Codes -
0 times, Diagnosis: Power does not turn on. Possible causes include: Power cord is not plugged in, Fuse is burned out (F6001) (G board). Symptoms of the problem: Power does not come on, No power is supplied to the unit, AC power supply is faulty.
2 times, Diagnosis: B overcurrent (OCP). Possible causes: H. OUT (Q8024) is shorted. (D board), +B PWM (Q8035, 8038) is shorted. (D board) Symptoms of the problem: Power does not come on, Load on power line is shorted.
3 times, Diagnosis: +B overvoltage (OVP). Possible causes: IC501 is faulty (G board), IC5002 is faulty (G board). Symptoms of the problem: TV has entered standby mode.
4 times, Diagnosis: Vertical deflection stopped. Possible causes: +- 15V is not supplied. (D board), IC8003 is faulty. (A board) Symptoms of the problem: TV has entered standby state after horizontal raster, Vertical deflection pulse is stopped, Power line is shorted or power supply is stopped.
5 times, Diagnosis: White balance failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301) is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2 is improperly adjusted. Symptoms of the problem: No raster is generated, CRT cathode current detection reference pulse output is small.
6 times, Diagnosis: LOW B OCP/OVP (Overcurrent/over voltage). Possible causes: +5 line is overloaded. (A, B boards), +5 line is shorted. (A, B boards). Symptoms of the problem: No picture.
7 times, Diagnosis: Horizontal deflection stopped. Possible cause: Q8035, 8038 is shorted. (D board)
8 times, Diagnosis: High voltage error. Possible cause: T8005 is faulty. (D board)
9 times, Diagnosis: Audio error. Possible causes: +- 19V line is shorted. (A, B boards), IC708 is faulty. (A board), PS701 or PS702 is opened. (A board). Symptoms of the problem: No sound
2 times, Diagnosis: B overcurrent (OCP). Possible causes: H. OUT (Q8024) is shorted. (D board), +B PWM (Q8035, 8038) is shorted. (D board) Symptoms of the problem: Power does not come on, Load on power line is shorted.
3 times, Diagnosis: +B overvoltage (OVP). Possible causes: IC501 is faulty (G board), IC5002 is faulty (G board). Symptoms of the problem: TV has entered standby mode.
4 times, Diagnosis: Vertical deflection stopped. Possible causes: +- 15V is not supplied. (D board), IC8003 is faulty. (A board) Symptoms of the problem: TV has entered standby state after horizontal raster, Vertical deflection pulse is stopped, Power line is shorted or power supply is stopped.
5 times, Diagnosis: White balance failure (Not balanced) Possible causes: Video out (IC7101, 7201, 7301) is faulty (CR, CG, CB board), CRT drive (IC309) is faulty (A board), G2 is improperly adjusted. Symptoms of the problem: No raster is generated, CRT cathode current detection reference pulse output is small.
6 times, Diagnosis: LOW B OCP/OVP (Overcurrent/over voltage). Possible causes: +5 line is overloaded. (A, B boards), +5 line is shorted. (A, B boards). Symptoms of the problem: No picture.
7 times, Diagnosis: Horizontal deflection stopped. Possible cause: Q8035, 8038 is shorted. (D board)
8 times, Diagnosis: High voltage error. Possible cause: T8005 is faulty. (D board)
9 times, Diagnosis: Audio error. Possible causes: +- 19V line is shorted. (A, B boards), IC708 is faulty. (A board), PS701 or PS702 is opened. (A board). Symptoms of the problem: No sound
MP3-MP4-PLAYER FIRMWARE
JXD 656E-SPMP3060 WITH USERCONFIG
http://www.4shared.com/file/1N3XMy37/656E-SPMP3060-With_Userconfig.html
JXD 685-BOARD ID JXD685D-0219
http://www.4shared.com/file/NZZu3Q_F/JXD685D-0219.html
http://www.4shared.com/file/1N3XMy37/656E-SPMP3060-With_Userconfig.html
JXD 685-BOARD ID JXD685D-0219
http://www.4shared.com/file/NZZu3Q_F/JXD685D-0219.html
Tuesday, November 8, 2011
Sunday, November 6, 2011
အီလက္ထရြန္းနစ္ဆိုင္ရာနည္းပညာမ်ား(၃) ဘက္ထရီ
(၁၈၀၀) ခုႏွစ္တုန္းက အီတလီနုိင္ငံက သိပၸံံပညာရွင္ အလက္ဇန္ဒရို ဗို႔တာ (Alessandro Volta) တီထြင္ခဲ့တာပါ။သူက ဆားေပ်ာ္ရည္စြတ္ထားတဲ့စကၠဴရဲ႕ေဘးတစ္ဖက္စီကို ဇင့္ျပားနဲ႕ေၾကးနီျပားကပ္ၿပီးဓာတုဓာတ္ျပဳမွဳ႕ကေနလွ်ပ္စစ္ဓာတ္ထုတ္ယူနုိင္ေၾကာင္းသက္ေသျပခဲ့တာပါ.
သူ႕ကိုဂုဏ္ျပဳျပီး ဘက္ထရီရဲ႕ပါ၀ါ(လွ်ပ္္စစ္တြန္းအား)ကို ဗို႕(volt) လို႕သတ္မွတ္ခဲ့ပါတယ္..ဘက္ထရီေတြမွာေတာ့ ဗို႕အားဆိုတာ အီလက္ထရြန္လိုေနတဲ့ဖက္ကအီလက္ထရြန္ဆြဲအားနဲ႕အီလက္ထရြန္ပိုေနတဲ့ဖက္က အီလက္ထရြန္တြန္းအားႏွစ္ခုေပါင္းရဲ႕တန္ဖိုးပါ။
အေပၚကပံုမွာဓာတုဓာတ္ျပဳမွဳ႕ေၾကာင့္ ေၾကးနီသတၱဳကသူ႕ရဲ႕အက္တမ္ေတြမွာပါတဲ့အျပင္ဖက္လမ္းေၾကာင္းက
အီလက္ထရြန္ေတြေပးပစ္လိိုက္ရပါတယ္.(Hole)ဟိုးလ္(အေပါက္ေတြျဖစ္သြားတယ္)အေပါင္းဓာတ္ေဆာင္ေနတယ္။ဇင့္(သြပ္)သတၱဳဖက္မွာေတာ့သူ႕ရဲ႕အက္တမ္ေတြရဲ႕
အျပင္ဖက္လမ္းေၾကာင္းမွာအီလက္ထရြန္ေတြပိုသြားပါတယ္။အႏုတ္ဓာတ္ေဆာင္ေနပါတယ္
။ေၾကးႀကိဳးနဲ႕ဆက္ေပးလိုက္ေတာ့အီလက္္ထရြန္ေတြအေပါင္းဖက္ကိုစီးသြားပါတယ္။
္(LED) ကိုျဖတ္စီးေတာ့အလင္းစြမ္းအင္ထြက္လာပါတယ္။ ပိုေနတဲ့အီလက္ထရြန္ေတြကုန္၇င္ အားကုန္သြားၿပီေပါ့။
ဓာတုဓာတ္ျပဳမွဳ႕ေၾကာင့္ ေျပာင္းလဲသြားတဲ့သတၱဳမွာအပိုအလိုျဖစ္သြားတဲ့ အီလက္ထရြန္ေတြကို ဆြဲအားနဲ႕တြန္းအား(ဗို႕အားကိုေျပာတာပါ)ေတြကေတာ့သတၱဳအမ်ဳိးအစားနဲ႕ဓာတ္ျပဳပစၥည္းေပၚမူတည္လို႕ဗို႕အားအနည္းအမ်ားကြာျခားသြားပါတယ္.
ပိုေနတဲ့ဖက္က အီလက္ထရြန္ေတြက အတြန္းခံရပါမယ္ လိုေနတဲ့ဖက္ကေတာ့ အီလက္ထရြန္ေတြကိုဆြဲပါမယ္။အဲဒီေတာ့ အနုတ္နဲ႕အနုတ္ေတြ႕ရင္ တြန္းကန္မယ္-အေပါင္းနဲ႕အနုတ္ေတြ႕ရင္ဆြဲငင္မယ္-အေပါင္းနဲ႕အေပါင္းေတြ႕ရင္လဲ တြန္းကန္မယ္ေပါ့
ဘက္ထရီေတြကရတဲ႕လွ်ပ္စစ္ဓာတ္ကေတာ့ ဒီစီ(DC) တိုက္ရိုက္လွ်ပ္စီးေၾကာင္း (DirectCurrent) ျဖစ္ပါတယ္။ အနုတ္ဖက္ကအီလက္ထရြန္ေတြက အေပါင္းဖက္ကဟိုးလ္ေတြဆီကိုတစ္ဖက္သတ္ထဲစီးဆင္းသြားလို႕ျဖစ္ပါတယ္။
လွ်ပ္စစ္စီးေၾကာင္းကိုတိုင္းတာတဲ့ယူနစ္ကိုေတာ့့ ျပင္သစ္သိပၸံံပညာရွင္ (AndreAmpere)ကိုဂုဏ္ျပဳျပီး
အပ္ပီယာ ( Ampere) လို႕သတ္မွတ္ပါထားတယ္.လွ်ပ္စစ္စီးေၾကာင္းရဲ႕အမွတ္တစ္ေနရာမွာတစ္စကၠန္႕အတြင္း
အီလက္ထရြန္အေရအတြက္ဘယ္ေလာက္မ်ားမ်ားျဖတ္စီးသြားလဲဆိုတာေဖၚျပတာပါ။ လွ်ပ္ကူးပစၥည္းတစ္ခုရဲ႕အမွတ္တစ္ေနရာကိုအီလက္ထရြန္ သန္းေပါင္း(၁၂၅၆၀၀)ကတစ္စကၠန္႕အတြင္းျဖတ္စီးသြားတာဟာ တစ္အမ္ပီယာရိွပါတယ္။
Friday, November 4, 2011
DVD-EVD PROGRAMMER CIRCUIT DIAGRAM
DVD-EVD PROGRAMMER CIRCUIT DIAGRAM FOR (EN 25T80)
http://www.4shared.com/get/Y5ttL2fC/PROGRAMMER_SOFTWARE.html
Subscribe to:
Posts (Atom)